What does barge mean in construction?
Freebase. Barge. A barge is a flat-bottomed boat, built mainly for river and canal transport of heavy goods. Some barges are not self-propelled and need to be towed or pushed by towboats.
Is a barge rafter structural?
It is structural enough to be used without sub-fascia.
What is a barge in framing?
A barge board is the wooden board found on a home that runs up the A frame of a gable. Another way to think of it is a more vertical fascia board. If you’re familiar with fascia boards, you know that they run along the eave where the gutter would mount.
What is a barge on a roof?
Bargeboards refer to the fascias located at the gable end or side of a roof. Used to protect the roof timbers of a building, bargeboards can also have a significant impact on the general aesthetics of the exterior of your property.
What is barge used for?
A barge is a flat-bottomed boat, built mainly for river and canal transport of bulk goods. Originally barges were towed by draft horses on an adjacent towpath.
What are the different types of rafters?
The seven types of roof rafters are often used in combination. There are basically seven different types of roof rafter designs used to create a roof: common, hip, hip jack, valley, valley jack, cripple jack and flying hip.
What is a barge board on a house?
A Bargeboard are also known as verge boards. They are the board that is fastened to the projecting gables of a roof. These provide strength to the roof and protect the otherwise exposed ends of timbers which are attached to the roof.
What is the difference between fascia and barge boards?
Barge boards and fascia boards are very nearly the same thing. They are both long, straight boards that run along the lower edge of the roof. However, fascia boards run horizontally, carry the gutters and support the bottom row of roof tiles. Barge boards run diagonally and are located at the gable end of a property.
What is barge on a house?
What’s the difference between fascia and barge board?
Why is it called a barge?
The word “barge” was first attested from 1300 and derived from the Latin “barga”. The word could refer to any small boat, whether it be used for pleasure or for commerce.
What is a barge platform?
Offshore Platforms A drilling barge is a large, floating platform, which must be towed by tugboat from location to location and are used mostly for onshore, shallow water drilling, which typically occurs in lakes, swamps, rivers, and canals.
What are different types of rafters?
What are the different kinds of rafters?
The most common types of rafter include:
- Principal rafter: Usually the largest type of rafter located at the ends of a roof structure.
- Common rafter: Smaller rafters located in between the principals at both ends.
- Auxiliary rafter: Less common but can be used to support and reinforce a principal rafter.
What is the barge on a roof?