How does a current sense transformer work?
Current sensors, also commonly referred to as current transformers or CTs, are devices that measure the current running through a wire by using the magnetic field to detect the current and generate a proportional output. They are used with both AC and DC current.
What is the function of H bridge?
The H-bridge is an electronic circuit that looks like the letter H. An H-bridge is used to drive a load, such as a brushed DC motor, in both directions. And it controls the flow of current to a load.
How does an H bridge control the current going to the motor?
An H-bridge is built of four switches that control the flow of current to a load. In the image above, the load is the M connecting the two sets of switches. Using one current source, you can drive current in two directions by closing two switches.
Why is an H bridge called an H bridge?
An H-Bridge is a circuit of 4 switches allowing to select the direction of current flowing through a part. The simplest H-Bridge consists of four manually controlled switches. The name is derived from the circuit diagram which looks like a capital H.
What is the use of CT and PT?
A CT lowers the current signals for measurement purposes, while a PT lowers high voltage values into lower ones. The transformers are designed to measure whether power systems are both accurate and safe. In addition, the CT and PT transformer reduces the current and voltage from high to low value.
What is PT transformer?
Voltage transformers (VT), also called potential transformers (PT), are a parallel-connected type of instrument transformer. They are designed to present a negligible load to the supply being measured and have an accurate voltage ratio and phase relationship to enable accurate secondary connected metering.
What happens if CT secondary is open?
The secondary side of a current transformer should never be kept in open condition because, when kept open, there is a very high voltage found across the secondary side. This high voltage causes a high magnetizing current to build up on the secondary side which in turn causes high flux and makes the core to saturate.
Why fuse is not used in CT?
For CT primary is just a current carrying straight conductor passed through coil which is secondary. Secondary generates feeble voltage so don’t require fuse protection.
How does an H-Bridge change direction?
An H-Bridge is made up of four switches: two in series, and two in parallel, with the load placed in between the switches. In this configuration the circuit takes an “H” shape. In order to change the direction of the voltage supplied, the H-Bridge controls the switches that deliver power to the load ( S1 ).