Why is my reciprocating saw not working?

Why is my reciprocating saw not working?

When you go to operate the saw, and the saw does not operate, you might want to check out a few things: 1) Make sure the battery is fully charged. 2) Be sure that the battery is put into the saw correctly, and secured. 3) There might be debris on the battery, or inside the saw, where the battery connects.

How do you lubricate a Dewalt reciprocating saw?

HOW TO GREASE THE GEAR ASSEMBLY ON THE DEWALT DC385K RECIPROCATING SAW.

1. STEP 1: PUSH PIN AND REMOVE SHOE.
2. STEP 2: REMOVE BOTH BRACKET SCREWS.
3. STEP 3: REMOVE BOTH PLASTIC COVERS.
4. STEP 4: WITH A GREASE GUN, SQUEEZE IN THE RECOMMENDED AMOUNT OF THE MANUFACTURE’S SPECIFIED GREESE.

Should you oil a Sawzall?

A: There are a number of things you can do to make your Sawzall blade last longer. First, always oil it properly every month after using it. Second, make sure that you clean off areas where dust and debris tend to gather such as the pivoting points and rubber grips using canned air or an air compressor.

Do you oil a Sawzall?

Lubricate your Sawzall regularly. The metallic moving parts of your Sawzall require lubrication with general household lubricating oil to maintain peak performance. Oil will burn off during use, and will be soaked up and carried away by sawdust, construction dust and other work site byproducts.

How do you change the blade on a Dewalt dw304p?

1. Open blade clamp release lever. 2. Remove blade….

1. Loosen set screw (B).
2. Insert blade shank (C) from the front between the reciprocating shaft (D) and the blade clamp. (E).
3. Tighten set screw.

How do you lubricate a Sawzall?

In general, to oil, your reciprocating saw, Remove the blade from the saw. Then clean off any old oil and dirt from the saw with a clean cloth. Next, apply a few drops of new oil to the moving parts of the saw. Finally, reattach the blade to the saw.