Discover the world with our lifehacks

Where is the WPS button on my Cisco router?

Where is the WPS button on my Cisco router?

WPS Setup

  • Push button: The WPS button is either on the product or a clickable button on the user interface.
  • Personal Identification Number (PIN): The PIN can be viewed in the product user interface.

How do I enable WPS on my wireless router?

  1. On the supplied remote control, press the HOME button.
  2. Select Settings.
  3. Select Network.
  4. Select Network Set up or Setup Network Connections.
  5. Select Wireless, Wireless LAN or Wi-Fi.
  6. Select WPS (Push Button).
  7. Select Start.
  8. While the device is searching, press the WPS button on the router to establish a connection.

What is WPS PIN or PBC?

The Push Button Configuration (PBC) method allows you to connect your machine to a wireless network by pressing both the WPS Settings menu on the control panel of your machine and the WPS (PBC) button on a Wi-Fi Protected Setup™ WPS-enabled access point (or wireless router) respectively.

Where is the WPS button?

NOTE: The Wi-Fi Protected Setup™ configures one device at a time. The WPS button is located either on the front or back panel of your Linksys device. Some Wireless-G routers may not have a WPS feature. Refer to your product documentation for the detailed features of your router.

Why WPS is not working?

Check the WPS settings in the Wireless Setup area of your modem’s user interface. Reboot your modem and try again. If you can’t get WPS to work after a few attempts, try connecting to the WiFi network using the network login information printed on the modem label.

What is the WPS number?

You can set up a connection by entering the WPS PIN (Personal Identification Number) code of the receiver into your wireless LAN router/access point to authenticate the connection between the devices.

What is a WPS number?

Where is the WPS or PBC button on router?

The WPS button is located either on the front or back panel of your Linksys device. Some Wireless-G routers may not have a WPS feature.

How long do you press the WPS button?

Press the WPS button on the device you wish to connect. Within 120 seconds, press the WPS button on the wireless router. Note: You will need to press and hold the WPS button on the wireless router for about 2-3 seconds. After a short period of time, your device and the wireless router will be connected.

What is Cisco epc3928s?

The Cisco Model EPC3928S is cable modem with a high-performance home gateway. EPC3928 impart faster connection to the Internet by 8×4 channel bonding where these bonded channels deliver downstream dat..

What is the default user name and password for epc3928?

09-16-2016 08:21 AM My cable company recently replaced my home router with a EPC3928, when it was installed, default user name is set to “cisco” and same password. Although I have changed via the management page, after a couple of days when I try to log back to the router’s admin pages I have noticed it has reverted back to “cisco”.

How do I create a WPS PIN for my router?

Entering the WPS Personal Identification Number (PIN) of the client device and clicking the Register button on the router web-based utility. Generating the Router WPS PIN on its web-based utility and entering the same PIN on the client device.

How many SSIDs does the router provide for WPS?

The router provides four virtual wireless networks, or four SSIDs and these are ciscosb1, ciscosb2, ciscosb3, and ciscosb4. By default, ciscosb1 has WPS enabled.