What is the username and password of my IP camera?

By default, the IP Camera’s administrator password is admin. And you can change the password on User Management page. If you forget the password, the only way is to reset the IP Camera to factory default setting via hardware reset button.

Table of Contents

How do I activate my IP camera?

How to activate IP camera thru PC?

Connect IP camera to the router & Windows PC connected to the same router.
Download the IP Portal software.
Found the IP camera from the IP portal, select & activate it.
Change IP camera IP address.

How do I log into CMS client?

In the user field, enter: ‘admin’ c. In the password field, enter: ‘00000000’ (8 zeros) d. Press ‘OK’ e. If a new camera has been detected, ensure the password matches the camera (by default, the IP Camera password is ‘123’), then press ‘Add All’ to add the new device.)

What is admin password in CCTV camera?

The default passwords for your DVR or NVR are the same as the username. Therefore, the default password for the 888888 User is 888888, the default password for the admin User is admin and the default password for the 666666 User is 666666. We recommend using the 888888 User when logging into your unit locally.

What is CMS password?

CMS uses the Social Security Number (SSN) as a unique identifier for each user. The last 6 digits of the SSN will be used for your default password. If you maintain your password appropriately by changing your password every 60 days, you will not require a password reset.

What is my Hikvision IP camera password?

Steps to change default password on Hikvision DVR/NVR

Go to Main Menu >> Configuration >> User.
Select the desired user and click ‘Edit’ icon.
Input the old password.
Check change password box.
Input the new password (complex password is highly recommended)
Confirm the new password.

What is UID on IP camera?

UID is a 16-character code and it is the camera/NVR’s unique ID that used to connect to the internet remotely. Use UID to add your camera/NVR on Reolink app or Reolink Client, you can access them remotely. Check details in How to Access Reolink Products Remotely.

How do I setup a CMS client?

Installation

Download the software from our Software Downloads page here.
Run the CMS Client Installer Application.
When prompted, change the Install Path to C:\CMS Client.
Continue through the prompts.
When finished, open the CMS Client software (it will create a desktop shortcut).
Click Setup.
Click Add Server.