Shabupc.com

Discover the world with our lifehacks

What is straight through cable?

What is straight through cable?

What Does Straight-Through Cable Mean? A straight-through cable is a type of twisted pair cable that is used in local area networks to connect a computer to a network hub such as a router.

What’s the difference between crossover and straight through cable?

Straight through cable connects a computer with a cable or DSL modem’s LAN port. Crossover cable connects with a router’s LAN port with switch/hub normal port. You should use straight-through cable when you want to connect two devices of different types.

Why do we use straight through cable?

Straight through cables provide a connection that only allows one end to communicate at any given moment. These cables are the most common. They are best when connecting two different types of networking equipment. For instance, they are appropriate for connecting a computer to a switch, router or printer.

Are Ethernet cables straight through?

Ethernet cables can be wired as straight through or crossover. The straight through is the most common type and is used to connect computers to hubs or switches. They are most likely what you will find when you go to your local computer store and buy a patch cable.

Where we can use straight cable?

A straight-through cable is used in local area networks to connect different devices like a computer to a network hub such as a router, router and switch, PC and switch, and so on. It is an alternative to wireless connections where one or more computers access a router through a wireless signal.

What are characteristics of STP?

STP and UTP Characteristics STP features two insulated copper wires that are twisted around one another and then covered with an additional shield. This extra covering boosts interference protection. STP is often utilized in Ethernet applications. UTP cables are a popular cable choice for LANs.

What are the characteristics of a straight through cable?

Straight through and crossover cables are wired differently from each other. One easy way to tell what you have is to look at the order of the colored wires inside the RJ45 connector. If the order of the wires is the same on both ends, then you have a straight through cable.

Which devices can be connected using a straight through cable?

What is the maximum cable length for STP?

The maximum distance for UTP/STP cable is 100 meters.

What are the advantages of STP?

Advantages of shielded twisted pair cable (STP): Shielding reduces the chance of crosstalk and provides protection from interference. It offers better electrical characteristics than unshielded cables. It can be easily terminated with a modular connector.

What devices can be connected using a straight through cable?

What is CAT3 cable used for?

A Category 3 cable (Cat 3 cable) is a type of unshielded twisted pair (UTP) cable that is used for voice and data communications in computer and telecommunication networks. It is an Ethernet copper cable defined by the Electronics Industry Alliance (EIA) and Telecommunication Industry Association (TIA).

How many computers can be connected with straight connected cable?

This allow connection of 2 devices of the same layer with straight-through cable.

Is STP better than UTP?

When people install and maintain them properly, STP cables greatly reduce crosstalk. This means that they stop signals from passing through the outer coating and inadvertently entering nearby wires. On the other hand, UTP wiring only offers basic protection.

What is the difference between UTP and STP cable?

Shielded twisted pair cable (STP) has the individual pairs of wires wrapped in foil, which are then wrapped again for double protection. Unshielded twisted pair cable (UTP) has each pair of wires twisted together. Those wires are then wrapped in tubing without any other protection.

What is the disadvantage of STP cable?

Disadvantages of shielded twisted pair cable (STP): Shield of STP cables must be grounded properly otherwise it acts as an antenna and picks up unwanted signals. More expensive than UTP. Difficult to and maintain. Much thicker diameter and not as flexible.