What is easy exit seat?

This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. The distance the driver seat moves depends on where you have the driver seat positioned when you cycle the vehicle’s ignition to the OFF position.

Table of Contents

What is seat exit memory?

To Set an Exit Position You can set your memory features to provide more clearance when exiting the vehicle. Adjust your seat, steering column and mirrors to positions that allow for comfortable clearance.

How do you turn off the easy exit seat on a GMC Acadia?

TO SET AN EXIT POSITION

Adjust your seat, steering column and mirrors to positions that allow for comfortable clearance.
Press and release the SET button.
Immediately press and hold the EXIT button until you hear two beeps.

How do you change the seat position on a GMC Sierra?

Enter the Settings menu within the GMC Infotainment screen. Select the “Vehicle” button, then either the “Seating Position” or “Comfort and Convenience” button, depending on the vehicle. From there, select “Seat Entry Memory, and select “On” or “Off” to enable or disable the feature.

What is auto memory recall on GMC?

AUTOMATIC RECALL When Seat Entry Memory is enabled within vehicle personalization menus, positions previously stored to memory buttons 1 and 2 are recalled when the ignition is changed from off to on or accessory, based upon the key or key fob used to access and start the vehicle.

How do you clear the memory on a GMC Sierra?

AUTOMATIC RECALL

Enter the Settings menu within the GMC Infotainment screen.
Select the “Vehicle” button, then either the “Seating Position” or “Comfort and Convenience” button, depending on the vehicle.
From there, select “Seat Entry Memory, and select “On” or “Off” to enable or disable the feature.

How do I change my seat position on GMC?

How do you adjust the driver seat on a GMC Sierra?

Turn the ignition to the ‘ON’ position, if the vehicle is not already on or running. Press and release the ‘SET’ button, and an audible beep should sound. Immediately press and hold the numbered button that matches your key/RKE fob (see above) until two beeps sound. Programming is now complete.