What is a Molex connector used for?
Certain Molex connectors are used for providing power to the motherboard, fans, floppy disk drive, CD/DVD drive, video card, some older hard drive models, and more. Compatible connectors are available from many manufacturers, not just Molex and AMP.
Where do you connect the Molex connector?
the molex connectors are to connect the fans directly to the PSU. The female part of the Fan-Molex-Connector to the male connector of the PSU. The male part of the fan is just so you don’t lose a connector by using the fan and can connect to any other molex female connector in your setup to supply power.
Are Molex connectors safe?
Molex to SATA adapter cables are a very simple and cost-effective alternative to buying a new power supply. However, they can be a dangerous alternative to getting a quality power supply, potentially damaging your SSD, internal components, and may also pose a fire risk in your home.
Do hard drives use Molex?
Typically, molex connections are found on older drives, or on larger 3.5 or 5.5-inch drives. However, molex connectors are too big to fit on a 2.5-inch drive. And as smaller drives have become the norm, SATA has gradually been replacing molex as the format of choice.
How much power can Molex provide?
The ATX standard for SATA or Molex connections is rated for 54 watts. Each SATA/Molex connector provides three 12v pins at 1.5 amps each, for a total of 4.5 amps. 12 volts, times 4.5 amps, equals 54 watts able to be provided by a SATA/Molex connector.
How do you disassemble a Molex?
To disconnect a Molex connector (male and female connection), simple press down on outside clip and pull the connectors apart. The power connectors have hooks that allow the connectors to latch into the connector housing. Once the crimped wire has been inserted into the housing, it will be difficult to remove.
What products are available with Molex connectors?
Exit Devices: 24/25
Why are Molex connectors used in computers?
– Suitable for 4-pin DIY molex connectors – Strong housing for the pins – Many parts in one kit – You can include wires of the desired length
Do you have to use Molex connectors?
Well, the answer is no due to a couple of reasons. If you look at what the peripherals use in the computer, they utilize a particular type of molex connection known as AMP/TE Mate-N-Lock connectors and other specialized kinds of connectors coined from Molex. These have male connectors in the female housing and vice versa.
What are Molex cables used for?
Molex connectors are often used to power electrical boards, computer fans, and disk drives, as well as electronic devices such as video game consoles and RC batteries. If your Molex connector is already plugged into an electrical board or device, turn off the device so there isn’t any electricity flowing through the wires.