What does offending command Xshow mean?

What does offending command Xshow mean?

‘Show’ is used in PostScript for the handling of text. This means that there is somewhere a piece of text or a font on your page that misbehaves. Solutions.

How do I print a test page on a Ricoh printer?

Press [Machine Features]. Press [Printer Features]. Select an item to print on the [List / Test Print] tab. If you select [Hex Dump], it will not print.

How do you power cycle a Ricoh printer?

Steps

1. On the lower front of the device, flip up the clear cover in front of the red power button.
2. Press and hold the power button for 5 seconds.
3. Allow the device to shut down by itself.
4. Once the printer has fully shut down and the screen has turned off, wait 10 seconds, then press the power button again.

How do you clean a Ricoh printer?

The best way to clean your RICOH multifunction printer According to the CDC, antibacterial wipes and cleaners need to sit on the surface, damp, for 3-5 minutes to kill germs. As a result and to maximize disinfection, you may want to clean your device during a low use time.

How do I print a configuration page on a Ricoh printer?

Printing a Configuration Page

1. Press the [Menu] key. The menu screen appears.
2. Press the [ ] or [ ] key to select [List/Test Print], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Config. Page], and then press the [OK] key.
4. Press the [Menu] key. The initial screen appears.

How do I print a configuration page?

From the Home screen on the printer control panel, swipe right to navigate, and then touch Reports. From the Reports menu, touch Configuration/Status Pages. Select the Configuration Page item, and then touch the Print button to print the Configuration pages.

How do you restart Ricoh?

You can restart the printer.

1. Select [Restart Printer] on the [File] menu.
2. Confirm the message that appears on the screen, and then click [Restart]. The printer restarts. The fonts that you downloaded in the printer’s memory will be deleted. If the printer restarts, all the printer settings return to their defaults.

How do you clean Ricoh printheads?

/Menu] key to display [Maintenance], and then press the [#Enter] key. /Menu] key to display [Head-cleaning], and then press the [#Enter] key. /Menu] key to select a color, and then press the [#Enter] key. To clean all the print heads, select [All Heads].