What does 0fb mean on Maytag washer?
off balance load
Your washer is off balance. If OFb (off balance load) appears in display, the load is out of balance. The washer was unable to remedy the off balance load via automated methods and now needs manual intervention to redistribute the load evenly around the washplate.
How do I fix my washing machine OFb?
Possible Solutions
- If OFb dial is flashing and display washer has or is stopping, wait for the lid to unlock, redistribute the load, close the lid, and press START/PAUSE to resume the cycle.
- Adding wet items to washer or adding more water to basket could unbalance washer.
- Avoid washing single items.
What does of6 mean on washer?
A Whirlpool washer error code E01/F06 indicates that the washer’s motor control unit (MCU) is having trouble communicating with the washer’s central control unit (CCU). In most cases, the issue is caused by a damaged MCU circuit, usually caused by an overload.
What does E01 and F01 mean on a Whirlpool washer?
E01 F01 is a very straight forward error for these Maytag Maxima washers. The error means your CCU (central control unit) has failed and will need to be replaced. The CCU is the main control board for your washer and it’s located under the top panel of the washer in the front right corner.
Why does my Maytag washer keep saying off balance?
Common solutions for: Maytag ob – Off Balance Washer vibration can occur if one or more of the shock absorbers is broken or worn out. Check the absorbers to be sure they are installed correctly and in the right position. Sometimes when a washer is moved the shock absorbers separate and have to be put back together.
How do you reset the lid lock on a Maytag Bravos washer?
Touch “Cycle Signal” near the front-loading washer’s LCD control panel to deactivate the washer’s lock controls. The lock icon disappears from the LCD control panel when the lock control is off.
Can you fix an unbalanced washing machine?
When a washing machine becomes unbalanced, it may start to vibrate excessively. The vibrations can quickly cause collateral damage, so it’s a problem that needs immediate attention. You can often fix the problem by redistributing the load — often a single heavy item in a light load can unbalance the drum.
What causes an unbalanced washing machine?
Redistributing The Washing Machine If four towels are sitting on one side of the washer and a set of sheets on the other, it will cause the machine to become unbalanced during the spin cycle. Furthermore, if you overfill the washer, it doesn’t give much room for the clothing to move around during the wash cycle.
What does F06 mean?
F06 — Door lock fault. Issue: Washing Machines door cannot be opened or closed / when the door is closed the machine the programme will not start. Advice: If your washing machines door will not close, please check for any obstructions in the door lock.