How thick can a 30 amp plasma cutter cut?
3/8 in.
Designed for portable repair work and small business project use, CUT-30 Plasma Cutter cuts a thickness of 3/8 in., and the max severance thickness is 1/2 in., Specifications: Type: DC Air Plasma Cutter, Supply Power: 115V/230V/60Hz/1-Phase, Rated Input Current: AC-115V/30A & AC-230V/15A, Cutter Current Range: AC-115V …
How thick can a 40 amp plasma cutter cut?
3/8-inch thick
This portable plasma cutter has a 40-amp adjustable output to cleanly slice through steel between 24-gauge and 3/8-inch thick. You can use it on stainless steel and aluminum, too.
How thick can a 110 plasma cutter cut?
Plasma Cutter, 110 Voltage CUT36 Cutting Machine 30Amps Output Current, Clean Cutting Thickness 4mm, Max Cutting Thickness 8mm (Orange V2) Learn more about free returns.
How thick can a 20 amp plasma cutter cut?
1/8 in.
Product Details. The Lincoln Electric Plasma 20 Plasma Cutter cuts sheet metal to 1/8 in. material with a maximum capacity of 1/4 in.
How thick can a 25 amp plasma cutter cut?
3/8″
Weighing in at only 29.5 lbs. (13.4 kg), it generates 25 amps of cutting power capable of cutting electrically conductive materials up to 3/8″ (9.5 mm) thick. Patented Vortech™ technology torch consumables are built to deliver efficient performance and long life.
How thick will a 45 amp plasma cutter cut?
2/5 in.
This is the new digitally controlled 20-55 amps Plasma Cutter Machine with advanced inverter technology and high cutting performance. Designed for portable repair work and small business project use, the CUT-45M Air Plasma Cutter cuts a thickness of 2/5 in. with the max severance thickness at 3/4 in.
How thick of steel can a 50 amp plasma cutter cut?
Designed for portable repair work and small business project use, CUT-50 Plasma Cutter cuts a thickness of 3/4 in., and the max severance thickness is 1.0 in. Type: DC Air Plasma Cutter. Supply Power: 110-Volt/230-Volt/60Hz/1-Phase. Rated Input Current: AC 110-Volt/35.7 Amp, 230-Volt/27.1 Amp.
How thick will a 60 amp plasma cutter cut?
The 60 amp max rating cuts steel up to 7/8-inch thick. At 20 amps output, this plasma cutter will cut as thin as 22 gauge sheet metal.
What size breaker do I need for a 40 amp plasma cutter?
Usually 8 for 40 amps and 6 for 60 amps.
How many amps does a plasma cutter need?
For 3/8” cut, 40 amps works out well for most brands of plasma cutters. For ½” cut, 50 amps works out well, etc.
What is the thickest metal a plasma cutter can cut?
Typically, a handheld plasma torch can cut up to 38mm (1.5 inches) thick steel plate. Whereas, if you need something a bit more powerful, an industrial computer-controller torch can cut steel up to 150mm (6 inches) thick. You also need to consider the type of metal that you are cutting.
What cuts better than a plasma cutter?
On thicker material, oxy-fuel cuts can be much faster than plasma. For example, a 2” thick piece of carbon steel, requiring a 4” long cut would take a 120-A plasma cutter roughly 1 minute to complete the cut, while an oxy-fuel torch could make the same cut in 15-20 seconds.
What size air compressor do you need for a plasma cutter?
The flow capacity of a compressed air system is largely determined by the size of the tank. As a good rule of thumb, select a compressor that has a flow rate capacity of at least 1.5 times the consumption rate of the plasma cutter.