How much does it cost to install James Hardie?
James Hardie Board Siding Cost The average cost to install Hardie siding is $6 and $13 per square foot. Installing Hardiplank shingles on a 1,600 SF house costs $10,000 to $18,000 on average.
How long does it take to install Hardie siding?
10 to 12 days
According to the James Hardie Siding Best Practices manual, selecting HardiePlank® siding puts your installation into the average category. Therefore, you can expect installation to take an average of 10 to 12 days. If the siding needs painting, expect the job to last an additional five days.
Who owns James Hardie?
Hardie retired in 1911 and sold his half of the company to Reid, whose family led the expanding business from 1911 until 1995, when his grandson John B. Reid retired. Today, James Hardie is a world leading manufacturer of premium building products.
What is the difference between Hardie HZ5 and HZ10?
The HZ5 line works best for extremely cold areas and places that experience huge variations in temperature. The HZ10 line is much better for humidity and rain, and houses that experience a great deal of exposure to the sun.
Why is Hardie siding so expensive?
High Installation and Labor Costs: Hardie board siding requires more planning, a larger labor force, and takes longer to install due to its composition. It weighs about 300 pounds (100 square feet) compared to 60-70 pounds for vinyl siding. This can increase labor and the cost of cement installation.
How much siding can you install in a day?
A two-person crew can install about 40 square feet per hour, or 400 square feet in a 10-hour day.
Is James Hardie still alive?
Hardie died of arteriosclerotic heart disease on 20 November 1920, while visiting Pine Farm, which he had established for his son at Poowong North, Gippsland.
Is James Hardie ethical?
Although the ethical behaviour of the officers of James Hardie was perceived through the media as one of an avaricious corporation seeking to deprive long-suffering persons with life-threatening, asbestos-related injuries from fair and just compensation, there was another ethical issue in the case.
Can you pressure wash HardiPlank?
The manufacturer recommends that you do not pressure wash your Hardie siding. The hard spray of water from the power washer can damage the surface of the siding.
Do you need OSB under Hardie board?
GENERAL REQUIREMENTS: HardiePlank® lap siding can be installed over braced wood or steel studs spaced a maximum of 24″ o.c. or directly to minimum 7/16″ thick OSB sheathing. See General Fastening Requirements.
Should Hardie board be caulked?
James Hardie DOES NOT recommend using caulk or “H”-jointers for the butt joints of HardiePlank® siding with ColorPlus® technology. James Hardie also DOES NOT recommend applying caulk to the horizontal overlap between siding planks (see Figure 2).
What kind of Nailer do you use for Hardie siding?
Framing nail guns can be used for siding installation, if the nail being used is long enough to attach the siding firmly to your exterior wood sheathing. While it’s recommended to always use a siding nail gun for siding installation, in a pinch, you may be able to use a framing nailer instead.
Does James Hardie still use asbestos?
James Hardie’s products no longer contain asbestos, but Werfel’s lawyer claimed the company should have done more to alert the public to the existence of asbestos in its old products, which were used in older homes.