How much does a four post lift Cost?
Standard installation should be around or under $500 for a two-post car lifting solution and under $1,000 for a four-post auto lift. As previously noted, in-ground car lifts and installations are by far the most expensive auto lifting option available, sometimes costing as much as $10,000.
Who makes backyard buddy lifts?
“Steel Valley has been manufacturing their line of lifts, including the Backyard Buddy, in Warren, Ohio for more than 30 years.
Can I put a 4-post lift in my garage?
Your garage needs enough space before you can install an auto lift. The typical measurements for a 4-post car lift is 103 inches wide by 173 inches long. Most passenger cars have a length of approximately 16 to 17 feet. If the cars you work on fall in this range, then this type of lift may be right for you.
How much height do you need for a 4-post lift?
If you want to install a typical 2-post or 4-post lift in your garage, you need a ceiling that’s higher than 11 feet.
How thick should a concrete slab be for a car lift?
4 inches
The recommended thickness for a car lift concrete slab is 4 inches minimum for most two-post lifts and four-post lifts. Additional thickness may be required for specific applications or different car hoist models.
Can you put a car lift in your backyard?
Technically, the correct answer is, “You can put it outside (as in, who’s stopping you?), but should you?” Lifts are designed for indoor use, installed in a temperature-controlled environment.
How high does my garage need to be for a lift?
12 foot
A general rule of thumb is to try for a minimum of 12 foot ceilings in your garage so that you have enough space for the car, the lift, and yourself. Don’t forget to leave enough space around the lift for you to work as well—at least two feet on every side.
How thick should a slab be for a car lift?
How thick of concrete do you need for a 4 post lift?
4‐1/4″
Pre-Existing Minimum Floor Requirements:
| TWO‐POST MODELS | MIN. THICKNESS | MIN. COMP. STRENGTH |
|---|---|---|
| 4‐POST LIFTS | MIN. THICKNESS | MIN COMP. STRENGTH |
| HD‐7 SERIES MODELS | 4‐1/4″ | 3000 PSI / 28 Day Aging |
| HD‐9 SERIES MODELS | 4‐1/4″ | 3000 PSI / 28 Day Aging |
| GP‐9 SERIES MODELS | 4‐1/4″ | 3000 PSI / 28 Day Aging |
Are any 4 post lifts made in USA?
Backyard Buddy. Proudly made in the U.S.A., our 4-post lifts provide world-class Quality, Safety, and Strength. Backyard Buddy lifts are trusted by thousands of Americans every day due to our high-quality steel, innovative mechanisms, and industry leading warranty.