How do you reset the oil life on a 2016 Jeep Cherokee?

Use the DOWN arrow on your steering wheel to scroll through the menu of your vehicle information center until you reach Vehicle Info. Scroll right to reach the Oil Life screen. Hold down the OK button to reset. The display should read 100% when it is reset.

Table of Contents

How do you change the oil in a Jeep Cherokee?

Shift the gear to the “ Park/P ” position.

Without holding the brake pedal,press the Start/Stop button to turn on the electronics.

On the steering wheel,navigate to the “ Oil Life ” selection under “ Vehicle Info “.

Push and hold the OK button until the oil light percentage changes to 100%.

Press the Start/Stop button to turn the electronics off.

How to reset the anti theft on a Jeep Cherokee?

co-utah. OK,I’ve read a bunch of threads about the same issue,and no definitive answer.

Capt JK

Fungun. Did you try jumping it,or measuring battery voltage?

2jeepsinCT. My daughter’s 2012 JKU Rubicon acted similar the day after she bought it used.

jasemccarty.

rlbuzz.

SoCalRubicon.

basicxj.

jasemccarty.

co-utah.

How do you reset service warning on Jeep Cherokee?

While the remaining OIL LIFE is displayed, press and hold the OK BUTTON until the OIL LIFE is reset to 100%. Turn OFF the ignition. The oil reset is complete. YOU CAN ALSO RESET THE OIL LIFE USING THE TUTORIAL BELOW. Close all doors. Set the gear to the PARK position. Turn ignition to RUN position, don’t start the engine.

Where do you put the antifreeze in a Jeep Cherokee?

– Getting Started. – Overview. How to determine cooling system type. – Open the Hood. – Find Reservoir. Locate the coolant reservoir and clean it. – Drain Reservoir. Remove coolant from the reservoir. – Radiator Cap. Remove the radiator cap before draining. – Drain Point. Locate the drain point on the radiator. – Drain Coolant.