How do you put together a tape gun?
Directions PDF Download
- Push roll onto tape wheel on a flat surface.
- Pull 5-6 in. of tape off & around the roll.
- Place tape between the roller & metal gate.
- Pull tape, sticky side down, under the roller.
- Cut off excess tape.
- Tighten tension knob if tape unwinds too quickly. To tighten, turn the knob clockwise.
How does automatic tape dispenser work?
The machine wets and automatically cuts the tape to the length on the selected button. The operator then transfers the tape to the open carton, positions it, places the tape on the open flaps and presses down. The tape then bonds to the carton, providing security and strength.
How do you load an office tape dispenser?
Most standard desktop dispensers have a button or latch you can press to disengage the core. Others simply slide out from one side. Removable cores will be the easiest to load, as you can simply slide the core through the new tape roll and replace it.
How do you load a Scotch brand packing tape gun?
Place tape and applicator roller on box front corner (centered on top seam). Roll dispenser down to tack tape lead end to side of box. B. Pull dispenser across box top seam applying pressure to applicator roller in order to obtain a tight seal.
What is inside a tape dispenser?
Gummed (water activated) tape dispensers measure, dispense, moisten, and cut gummed or water-activated adhesive tape. This tape is often composed of a paper backing and adhesive glue that is unable to adhere until it is “activated” by contact with water.
How do you change a tape in a tape holder?
Hold the spindle so that the paper tab on the end of the roll is facing up and toward the front of the dispenser. Slide the spindle and the new full roll of tape back into dispenser. Settle it into its holding grooves so that it moves freely.
What is inside tape dispenser?
How does an automatic tape dispenser work?
How do I use a packing tape dispenser?
Pull the front tab of the tape roll through the slot between the dispenser roller and shield. Some packing tape dispensers have a shield that slides down to allow for the tape. The sticky side of the tape should face down. 3. Pull the tape up across the tape blade, being careful not to cut yourself on the tape blade. 4.
How do I test the tape dispenser?
To test the dispenser, pull a small amount of tape out and cut the tape with the blade. 5. Adjust the tensioner on the dispenser (in the center of the tape roll holder) to set a smooth and comfortable unwind mechanic. You have no items to compare. You have no items in your wish list.
How do I adjust the tension on my tape dispenser?
Tighten the nut on the spindle clockwise to increase the tension. The nut is in the middle of the spindle and lets you adjust the tension of the dispenser. If the tension is too loose, the tape might not wrap tightly enough around the packaging to seal it properly. If the spindle is too loose, you could end up using more tape than you had in mind.
Why is it important to properly use a tape dispenser?
It’s important to learn how to properly use a tape dispenser because shipping companies will send back packages that are not taped well. It can be a bit tricky to load tape into a dispenser, but once everything is set up the dispenser will save you tons of time!