Discover the world with our lifehacks

How do you identify a Vickers hydraulic pump?

How do you identify a Vickers hydraulic pump?

Pump Identification Codes In general, with old Vickers vane pump identification, the V10 and V20 series are indicated at the second and third positions of the model code. Look for F3 code in the first position because it indicates the use of special O-rings or seals.

What do you mean by hydraulic pump?

Hydraulic pumps convert electrical energy into fluid pressure by using an electric motor to drive the pump. They are necessary for all hydraulic drives. The fluid pressure is then delivered by hydraulic fluid to cylinders and actuators and hydraulic motors at the required pressure level and volume.

What is the working principle of hydraulic pump?

The working principle of hydraulic pump is the same for all the other pumps. Due to mechanical action, the pump creates a partial vacuum at the inlet. This causes the atmospheric pressure to force the fluid into the inlet of the pump. The pump then pushes the fluid into the hydraulic system.

How do you calculate pump rotation?

Rotation is indicated on the head of the pump, you’ll see an arrow going counter-clockwise. This is the direction you want the pump spinning. If you turn the motor around and look at the backside and remove the cap, you’ll see a shaft located in the center.

Are hydraulic pumps self-priming?

Not all hydraulic pumps require priming. Some rely on air pressure and gravity to ensure that the suction line and pump remain air-free. Some systems are self-priming, see more about self-priming pumps below.

What is the best type of hydraulic pump?

Rotary-vane pumps They generally offer better volumetric efficiency than gear pumps. They produce less noise while maintaining high speeds (up to 3,000 rpm).

What are the uses of Vickers hydraulic pumps?

They are widely used in hydraulic systems for machine-tools , presses, die casting machine, engineering, plastic injection molding and other machineries. • Its interchangeable with original Vickers hydraulic pump of the same model.

What is the model code for a Vickers double pump?

Note: For options other than listed in the model code, i.e. shafts, ports, displacements and mountings, contact your Vickers representative. 2520VQ (S) 1211 (S) CC 0 (L) 11 11 25 Model Codes Double Pump (with integral valves)

What are the different models of Vickers A2 Eaton PVQ piston pumps?

Model PVQ10 Model PVQ13 Model PVQ20 PVQ25 PVQ32 PVQ40 PVQ45 Variable Displacement, Quiet Series For Industrial Applications Vickers™ A2 EATON PVQ Piston Pumps Catalog Table of Contents 11-06-0002-EN-0801 Table of Contents

What type of hydraulic fluid can be used in a PVQ pump?

The PVQ series is capable of operating with many types of hydraulic fluid. Water-content and phosphate ester fluids can be accommodated, in addition to the typical petroleum based and synthetic fluids. Many PVQ pumps are available in a thru-drive configuration to accommodate a multitude of applica- tion and installation requirements.