How do you finish a half wall?
Lay your flat molding just slightly off the edge of the top of your half wall. Then secure with finishing nails to hold it in place. If your first piece isn’t long enough, lay another piece along the wall and mark the remaining section. Cut the extra piece with a straight cut and attach with finishing nails.
What is trim in the middle of the wall called?
Definition. Chair rail by definition is molding on an interior wall that is attached horizontally around the perimeter of a room. Most people associate chair rail as a type of trim that prevents chairs from rubbing against the walls.
What is ceiling molding called?
Crown molding is literally what you think—an overhead crowning touch that flares out in the space where the walls and ceiling meet. Also known as cornice molding, it may be elaborate, with decorative cutouts, or simple and linear (Shaker) in design.
What is the top of a half wall called?
The top of a pony wall is often finished with a wood cap. Usually, this cap overhangs the wall by an inch or so to create enough space to run molding to hide the joint. Used this way, pony walls are a great way to separate spaces while preserving long, interior views that make both areas feel larger.
What do you put on top of a pony wall?
Paneling, beadboard, and drywall are all commonly used to finish the sides of pony walls stationed in living spaces, while the top caps are often made from stained hardwood or painted finish-grade plywood. In the bathrooms, however, tile is commonly used to finish pony wall sides and caps.
What is crown moulding on walls called?
Crown Moulding: Also called cornice moulding, it’s used to cover the intersection where the walls and the ceiling meet, usually over a large angle.
What is the top of a wall called?
At the top of the wall is the top plate. Often a doubled 2×4, it anchors the top ends of the studs as well as ties the wall into the ceiling.
What is a knee wall cap?
Knee walls, raised areas of drywall used to secure balusters, receive a finishing touch with StairSupplies™ Knee Wall Caps. Perfect for standard angled or level knee walls, including those used as short partitioning walls, Knee Wall Caps slide directly overtop existing drywall for an elegant finish.
What do you call the top of a wall?
At the top of the wall is the top plate. Often a doubled 2×4, it anchors the top ends of the studs as well as ties the wall into the ceiling. In new construction, the walls are usually built while on the floor, with a single top plate.
What is the difference between crown molding and trim?
Types of Trim Molding Casing trim is placed around openings, such as windows and doors. Baseboards are positioned along the bottom of walls, while crown molding is installed at the top near the ceiling.
What is a top wall plate?
The top plate is the upper horizontal framing member of a stud wall. It is typically the same width as the studs and bottom plate and is some type of stress-graded dimensional lumber, commonly 2×4 or 2×6.
What is the top edge of a building called?
In architecture, a cornice (from the Italian cornice meaning “ledge”) is generally any horizontal decorative moulding that crowns a building or furniture element—for example, the cornice over a door or window, around the top edge of a pedestal, or along the top of an interior wall.
What is polyurethane moulding?
Polyurethane molding is the process of fabricating or manufacturing plastic parts by introducing a urethane polymer system into a tool or mold and allowing it to cure. Polyurethanes are extremely versatile materials that can have various formulations to yield different plastic properties.
What do you call decorative molding on walls?
Panel Mould: A decorative moulding used to trim out raised-panel wall construction. Picture Frame Moulding: A narrow moulding along the perimeter of the walls near the ceiling line to support hooks for picture hanging. It can be used to make decorative, formal squares on the wall.