How do I set up Turtle Beach PX3?

You may use the PX3 transmitter power cable to use the PX3 in wired mode.

Table of Contents

Power on the PX3 headset.
Insert the USB Mini-B end of cable into the headset and the USB Standard-A end of the cable into your computer.
Double-press the Power button on the headset to enter Wired Mode.

How do you connect turtle beach?

SETUP FOR XBOX

Press and hold the Power button on the headset to power the headset on.
Press the Enroll button on the console. Then, press and hold the Connect button on the headset.
Within a few seconds, the LEDs on both the headset and console will turn solid, indicating that pairing was successful.

How do I pair my px3 headset?

Press and hold the PAIR button on the Transmitter for 3 seconds. The LED on the Transmitter will begin to blink rapidly. After a few seconds, the Transmitter LED should be solid, and the Headset LED should be blinking about once per second. The Headset and Transmitter are paired.

How do I get my Xbox headset to work?

Follow these steps to ready your Xbox One Stereo Headset for use with your console: Update your Xbox Wireless Controller to make sure it’s ready to work with the headset adapter. Insert the adapter into the bottom of the controller. Then, insert the headset’s audio plug into the bottom of the headset adapter.

How do I get my Turtle Beach headset to work?

Go to Settings >> Devices >> Audio Devices.

Set Input & Output Device to Headset Connected to Controller.
Set Output to Headphones to All Audio.
Set Volume Control (Headphones) level to maximum.
Select Adjust Microphone Level and follow the on-screen instructions to calibrate your microphone.

Why can’t I hear through my headset on Xbox?

Mic issues: If your friends can’t hear you, first make sure that your mic isn’t muted, then check in headset settings that Auto-mute is not set to High (try turning Auto-mute off). If that doesn’t fix the problem, restart both devices. You should also check to see if a firmware update is available for your headset.