How do I Scan from my Canon imagerunner to my computer?

You can scan a document using the buttons on the MF Toolbox.

Table of Contents

Place documents.
On the Windows desktop, double-click the [Canon MF Toolbox 4.9] icon to open the MF Toolbox.
Click one of the scanning buttons.
Specify the required settings.
Click [Start].
Specify the required settings.
Click [Scan].

How do I scan a folder on a network?

Click Start, and then click Programs. Click HP, click the name of the printer, and then click Scan to Network Folder Wizard. In the Network Folder Profiles dialog, click the New button. The Scan to Network Folder Setup dialog opens.

How do I change the default scan location in Windows 10?

In Windows 10, just right-click on the Documents folder in File Explorer and select Move. Move it to the desired location by moving or without moving existing files. Fax & Scanner will now scan to the new location.

Does the ImageRunner 1025if have send/fax capability?

†† Send/Fax capability is only available on the imageRUNNER 1025iF model. ††† Approximate 3-second-per-page fax transmission time based on ITU-T No.1 Chart (JBIG, Standard Mode) at 33.6 Kbps modem speed when transmitting to another V.34 machine.

How to send scanned files by scan to folder?

Preparation for Sending by Scan to Folder To send scanned files by Scan to Folder, you must first perform the following: Check the machine is properly connected to the network Configure the network settings in [System Settings] Configure the necessary settings in [Scanner Features]

How do I configure the scanner features?

Press the [User Tools/Counter] key. Press [Scanner Features]. The Scanner Features screen appears. Press the [General Settings], [Scan Settings], [Send Settings], or [Initial Settings]tabs and configure the relevant settings on those tabs.

How do I change the scan to Folder function on Windows?

For details about network settings and configuration procedures, see “Network Settings Required to Use Scan to Folder Function”, General Settings Guide. Press the [User Tools/Counter] key, and then press [System Settings]. The System Settings screen appears. Press the [Interface Settings]tab.