How do I reset my Onan RV generator?
How do I reset my Onan generator? Resetting the fault codes on your generator is simple. Locate the primer button and hold it down for about 30-seconds. Release the button and then start your generator.
How much does an Onan 6500 generator weight?
299 pounds
This Onan 6500 Propane Generator weighs just 299 pounds and has a compact design of 33.6-inches wide x 22.2-inches deep x 16.7-inches high.
How do I reset my Onan generator code?
How to Clear a Fault Code on Onan Generator
- Locate the primer button on the generator.
- Hold the primer button down for at least 30 seconds.
- Release the button and start the generator.
- Allow the generator to run for 15 minutes, to ensure that the code has cleared.
What kind of oil do I put in my Onan generator?
Onan RV recommends changing the oil every 100 hours or once a year, whichever comes first. It only takes about 20 minutes and you will be good to go for the season. You will need a T30 torx bit, a 12mm socket, an oil pan, a funnel and 1.6 quarts of SAE30 or 15W-40 oil.
How many quarts of oil does a Onan generator take?
How do you clear the codes on an Onan generator?
How often should I change the oil in my Onan generator?
The Onan generator manual recommends changing the oil each year or every 100 hours of use.
Can I run synthetic oil in my Onan generator?
Can I use synthetic oil in my Onan generator? Cummins does not recommend the use of Synthetic oil in Onan RV generators as there are no long-term benefits for the additional cost.
Why is my generator cranking but not starting?
If the carburetor is clogged, chances are the fuel valve is clogged as well. Check to ensure that the fuel and vacuum relief valves above the generator’s gas tank are open. If your generator still won’t start, unplug the fuel hose and check if gasoline can flow through the fuel line.