How do I reset my Brother HL 2130 printer?

How do I reset my Brother HL 2130 printer?

Brother HL2130 Toner Reset – TN2030

1. Open the front cover and leave open while completing the following steps.
2. Turn the printer off.
3. Hold the ‘go’ button (or “start’ button) while turning the printer on.
4. Release the ‘go’ button (or “start’ button).
5. Press the ‘go’ button (or “start’ button) twice.
6. Pause.

How do I reset my Brother HL 2132?

Brother HL-2132 – Factory Reset

1. Turn off the printer.
2. Hold the GO button while you turn the printer on. Hold the button until all the LEDs light up and the Ready LED light turns off.
3. Release GO, all the LEDs will turn off.
4. Press GO ten (10) times. The printer will automatically restart.

How do you reset the drum on a Brother HL 2140?

Brother HL-2140 – Reset Drum Simply open the front cover, and hold the “GO” button until all four LED’s are lit. Release the “GO” button and close the front cover.

How do I factory reset my Brother printer?

Unplug all the interface cables before you perform a Factory Reset.

1. Press the Up or Down arrow key to select Initial Setup, and then press OK.
2. Press the Up or Down arrow key to select Reset, and then press OK.
3. Press the Up or Down arrow key to select Factory Reset, and then press OK.

How do I clean the inside of my Brother printer?

How can I clean the inside of the printer?

1. Turn off the printer power switch, and then unplug the printer.
2. Press the front cover release button and then open the front cover.
3. Take out the drum unit and toner cartridge assembly.
4. Wipe the scanner window with a dry, lint-free cloth.

How do I reset my Brother drum?

Reset the Drum Counter

1. Close the front cover.
2. Make sure the machine is turned on.
3. Press. (Settings).
4. Press All Settings. (This step might be skipped in some models.)
5. Choose Machine Info. or Machine Information => Parts Life.
6. Press and hold Drum or Drum Life until the machine’s display message changes.
7. Press Yes.
8. Press.

Can you clean a Brother drum?

DO NOT clean the surface of the drum with a sharp object or any liquids. Use only a cotton swab, or a dry lint-free cloth. We recommend placing the toner cartridge and drum unit assemblies on a clean, flat surface with disposable paper underneath it in case you accidentally spill or scatter toner.

How do you check the drum on a Brother printer?

You can view your current drum’s remaining life on your Brother machine’s LCD by following these steps.

1. Press MENU and choose Machine Info. => Drum Life.
2. Press the OK key. Your Brother machine’s LCD will display the percentage of remaining drum life.
3. Press the STOP/EXIT key.