How do I enable AHCI in Windows 10 registry?

Right-click the Windows Start Menu once more. Choose Command Prompt (Admin). Type this command and press ENTER: bcdedit /deletevalue {current} safeboot (ALT: bcdedit /deletevalue safeboot) Reboot once more and Windows will automatically start with AHCI drivers enabled.

Table of Contents

How do I enable AHCI in registry?

How to Enable AHCI Mode for SATA on a Computer Where Windows is Already Installed?

Run Registry Editor.
To do it, press Win + R and type in the command regedit.
Go to the section HKEY_LOCAL_MACHINE\ SYSTEM\ CurrentControlSet\ Services\ iaStorV.
Double-click on Start element and set its value to 0 (zero).

Does Windows 10 have AHCI drivers?

2. Download Standard SATA AHCI Controller drivers for Windows 10 AMD. If you have a computer with an AMD processor, you can download the latest Standard SATA AHCI Controller drivers by clicking here. This link is an official link from Microsoft, which means it’s a trusted source.

Is AHCI required for SSD?

AHCI mode as previously explained enables NCQ (native command queuing) which is really not required for SSDs as they do not need optimizing in this way as there is no physical movement of heads or platters. In many cases, it can actually hinder SSD performance, and even reduce the lifetime of your SSD.

How do I install AHCI on Windows 10?

Step 1: Type Command Prompt in the Cortana’s search box and run Command Prompt as administrator. Step 2: Type the bcdedit /set {current} safeboot minimal command and then hit Enter. Step 3: Boot your computer into BIOS and then enable AHCI mode. Step 4: Save changes then exit BIOS.

How do I install AHCI drivers on Windows 10?

4. Install or update drivers for Standard SATA AHCI Controller

Press and hold the Windows key on your keyboard, then press R.
Type in “devmgmt.
Expand the “IDE ATA/ATAPI controllers” category.
Right-click on each of the listed items in this category, then select “Update driver.”

How do I set SATA mode to AHCI?

1. Enable AHCI mode in BIOS

Shut down your system.
Power the system On, and tap the F2 key to boot to BIOS.
Go to System or Hardware configuration (this will differ based on BIOS).
Look for AHCIor SATA mode.
Enable AHCI or under SATA mode, set it to AHCI.
Save and Exit BIOS.
AHCI will be enabled.

How do I enable AHCI mode on my SSD?

If it isn’t, enable it and your SSD should start working normally.

Shut down your system.
Power the system On, and tap the F2 key to boot to BIOS.
Go to System or Hardware configuration (this will differ based on BIOS).
Look for AHCIor SATA mode.
Enable AHCI or under SATA mode, set it to AHCI.
Save and Exit BIOS.