How do I access my FTP server behind my router?

NOTE: Images may vary depending on the model and firmware version of your Linksys router.

Table of Contents

Access the router’s web-based setup page.
On the Setup page, click Applications & Gaming.
Under Single Port Forwarding sub-tab, select FTP for Application.
Enter the IP Address of your FTP server under To IP Address.

What is FTP on router?

FTP is an abbreviation for File Transfer Protocol. It is an open protocol standard that is widely used to transport and receive large files on TCP/IP Network. It can also be used to send configuration files and software updates for network switches and routers.

How does FTP work behind a firewall?

When passive FTP is used, the client will initiate the connection to the server. This process is effective because most firewalls allow inbound traffic from sessions initiated by the client. A passive FTP connection follows the following process: The client sends the PASV command to an FTP server on port 21.

Should I disable FTP on router?

The FTP server enables you to use your router as an FTP server for FTP client requests. Because it allows access to certain files in the router Flash memory, this service should be disabled when it is not required.

How do I access an outside FTP?

When you’re accessing it inside the network, use the Internal IP address. When you’re accessing it outside the network, use the External IP address. If you have a firewall on your PC or router, you’ll need to open port 21.

What ports should I block on my home router?

For example, the SANS Institute recommends blocking outbound traffic that uses the following ports:

MS RPC – TCP & UDP port 135.
NetBIOS/IP – TCP & UDP ports 137-139.
SMB/IP – TCP port 445.
Trivial File Transfer Protocol (TFTP) – UDP port 69.
Syslog – UDP port 514.

What happens if I turn off port forwarding?

Port forwarding, or port mapping, allows remote servers and devices on the internet to access the devices that are within your private local-area network (LAN) and vice versa. Without port forwarding, only devices that are part of the internal network can access each other, and with port forwarding, anyone can.

Can I access FTP from anywhere?

After we have set up an FTP Server on a Windows computer, it will be accessible within a Local Network. But if you wish to access the hosted files remotely, it brings in some limitations.

Does FTP work over Internet?

File Transfer Protocol is a set of protocols that the networked computers use to talk over the internet. In more simple terms, it is a way to connect two computers and move files between them. FTP allows new web pages that are created by an individual to show up on the internet.

How do I setup an FTP server on my router?

To set up FTP access through the Internet:

Launch an Internet browser from a computer or wireless device that is connected to the network.
Enter the router user name and password.
Select ADVANCED > USB Storage > Advanced Settings.
Select the FTP (via Internet) check box.
Click the Apply button.