Do you paint stria cladding?
Stria Cladding must be dry and free of any dust or grime before painting. The cladding must be painted within 90 days of installation. There is no restriction on the LRV of paint to be applied on the Stria Cladding. James Hardie recommends a minimum of two coats of exterior grade acrylic paint.
What is Scyon cladding made of?
Scyon Stria Cladding Stria™ cladding is made from Scyon™, this means a complete package of advanced, lightweight cement composite that is pre-primed, easy to install and has heavy-duty performance. It features resistance to termites, rot and fire.
What is Scyon made from?
Stria™ cladding is made from Scyon™, this means a complete package of advanced, lightweight cement composite that is pre-primed, easy to install and has heavy-duty performance. It features resistance to termites, rot and fire.
What is Stria Cladding made of?
Made from premium fibre cement, Stria Cladding is a durable, low maintenance cladding that can be painted any colour you like.
Where do you nail weatherboards?
Weatherboard should be secured by driving the nail as close as possible to the lower most edge of the siding without penetrating the top (or head) of the siding board beneath. E.g.: in observing minimum recommended lap of 21mm, nail entry should be around 25mm up from butt (or lower most edge).
How much do weatherboards overlap?
An overlap of 1 ½” to 2” (40mm – 50mm) is normally sufficient. Today, it is customary to fasten weatherboards with round wire nails.
What is a rainscreen cladding system?
Rainscreen cladding is the attachment of an outer skin of rear-ventilated cladding to a new or existing building. The system is a form of double-wall construction that uses an outer layer to keep out the rain and an inner layer to provide thermal insulation, prevent excessive air leakage and carry wind loading.
Can Scyon axon be installed horizontally?
Scyon™ Axon™ cladding must be installed vertically with all sheet edges fully supported.