Can composite hockey sticks be repaired?
After years of producing affordable high performance composite hockey sticks, Bison Hockey Sticks has developed a patent pending, easy to use Do-It-Yourself hockey stick repair kit for repairing the shaft of most junior, intermediate and senior size composite hockey sticks.
How do you fix a chipped hockey blade?
Always check the blade after use because small cracks are much easier to repair than large cracks. Sand off the rough or sharp edges of the crack. Once the crack is smooth, press the edges together to check for fit. Apply an epoxy resin glue and filler to the crack.
Can you bend a composite hockey blade?
Curving the Blade Without stopping, expose both sides of the blade to the heat as evenly as possible. Do this for approximately 60 seconds. Put the oven mitt on your dominant hand and gently apply pressure to the blade in the desired direction, gripping the shaft of the stick with your other hand.
What is the warranty on hockey sticks?
Hockey sticks carry a limited warranty which covers breakage that is a result of a manufacturing defect, within 30 days from the original date of purchase.
Is my hockey stick broken?
Here’s How to Tell if Your Hockey Stick Is Broken: If your stick feels like it’s a bit “whippy” or it has lost its stiffness, it may be broken. While it may still be usable, it won’t perform at its best.
Can I bend a hockey blade?
Make sure that the blade is over 75 percent under the oven and wedged in there so that it won’t move on you. Then start cranking up on the shaft, forming that jaw-dropping curve you’ve been dreaming about. Once you have the curve where you want it, hold it in place for approximately 60 seconds.
Can you Rebend a hockey stick?
Because of this, curving the blade may nullify any guarantees or warranties on the stick. While most sticks can be adjusted slightly, it is not advisable to attempt changing a left-handed stick to a right-handed stick or vice-versa.
How are composite hockey sticks made?
Below is a detailed explanation of how we do it: The first thing you need to know is that composite hockey sticks shafts are manufactured from a number of woven fibres which are coated in resin, wrapped in a mould, and baked in an oven.
How long does it take for a hockey stick to cure?
Thus, concealing the stick with an internal fix leaving minimal visual disturbance to the external shaft profile. 5 – The stick undergoes a 72 hour curing period in a temperate room until hardened.
How is the stick attached to The Aircore?
The top section of the stick is placed over the Aircore Sleeve, re-aligned, clamped together, and taped (to deter epoxy leakage).