Are Whitfield pellet stoves any good?
The Whitfield Cascade® free-standing stove packs a lot of performance into an affordable, high-efficiency model. This impressive workhorse features a large fuel capacity and combustion to ensure clean, long burning times for uninterrupted warmth.
Can you still get parts for Whitfield pellet stoves?
Most parts are still available direct from the factory. If you can not find the part you are looking for please call, e-mail or fill out our Parts Request Form and we will be happy to assist you.
How heavy is a Whitfield pellet stove?
Emissions Profile 20 0.4 gr./hr. Profile 30 1.9 gr./hr. Weight Profile 20 215lbs.
What year is my Whitfield pellet stove?
The best way is to refer the stove safety label found inside the hopper lid or sometimes on the back of the stove. The serial number is proceeded by “WH-“. Locate the date of manufacture which is also notated on the safety label for accurate identification.
How do you calibrate a Whitfield pellet stove?
down door at the bottom of the control panel is a button labeled “Calibration.” Pressing the Calibration button enters the controller into “Calibration Mode,” where ad- justments of up to +/- 20% (increments of 5%) can be made to the fuel feed and the combustion blower.
What happened to Whitfield pellet stoves?
Whitfield is a discontinued brand of pellet stoves and fireplace inserts. Whitfield was a part of Lennox Hearth Products, now known as Innovative Hearth Products.
Who manufactures Whitfield pellet stoves?
Lennox Hearth Products, The current manufacturers of the Whitfield pellet stove and a division of Lennox Industries, was formed in 1996 and took over Pyro Industries in 1998. Country Collection, which used to be Country Stoves, acquired by Lennox Hearth products in 2006.
How do I know what pellet stove I have?
You can find your appliance’s serial or model number by locating the rating plate. These are located in different positions depending on your specific model, but can generally be found either on the back of your stove or inside the appliance’s pedestal base.
Why does my Whitfield pellet stove keep shutting off?
If the stove runs less than 5 minutes before shutting down, it may not have reached the minimum temperature for the low limit sensor to take control after the start up cycle. Try running the start-up cycle again and if it still shuts down the low limit sensor may be stuck open.
Can a pellet stove explode?
Poor quality and/or damp pellets are slow to ignite, which can cause your burn pot to become overloaded and results in a larger than normal pile of pellets. If this happens, the pile of slowly burning pellets can suddenly ignite, causing a small explosion within the stove.
Can I open pellet stove while running?
Pellet stoves still use a real fire inside the combustion chamber to produce heat and so can pellet stoves be left unattended even through the whole heating process can be automated? In the majority of circumstances it can be fine to leave a pellet stove operating unattended.
Is it OK to leave pellet stove on overnight?
Although it can seem unusual to leave a fire burning in your home without you watching over it (as commonly required or highly recommended with other forms of fireplace such as open wood burning fireplaces) it can be fine and very safe to leave a pellet stove unattended.