Are Fisher plow mounts Universal?
The additional benefit of the FLEET FLEX system is that it is completely universal to all current FISHER snowplows. This means that plow fleets are able to optimize their operations and use any plow on any vehicle.
How high should plow shoes be?
Plow Shoes: These attach to the bottom of the snowplow blade and slightly raise it, allowing it to float over the gravel. Set the shoes about 3/8″ below the blade and adjust them to be about ½” above the ground.
Is there a service guide for a Fisher Snowplow?
5 This guide has been prepared to assist the trained mechanic in the service of FISHER®snowplows. It also provides safety information and recommendations. We urge all mechanics to read this manual carefully before attempting to service the FISHER snowplow equipment covered by this guide.
How do I connect the diagnostic harness to the plow module?
Connect the diagnostic harness connectors A and B to the matching ports on the Plow Module (A to A and B to B). 4. Plug the connectors removed from the Plow Module into the matching connectors on the diagnostic harness (A to A and B to B). TROUBLESHOOTING SOLENOID COIL ACTIVATION TEST (SCAT) WARNING Lower blade when vehicle is parked.
How do I know if my plow module has switched ground?
4. If 12V is present at the small relay terminal with the red wire, turn the control ON, then check for switched ground on the small terminal with the black wire attached to it while activating any function except lower. If switched ground is not present, check the black wire in harness B of the Plow Module.
What is Fisher Engineering’s policy on snow removal?
Fisher Engineering reserves the right under its product improvement policy to change construction or design details and furnish equipment when so altered without reference to illustrations or specifications used. Fisher Engineering or the vehicle manufacturer may require or recommend optional equipment for snow removal.