How do you Mitre a wide skirting board?
1 Answer
- Clamp the box to a table.
- Place a board at least as thick as the bottom of the mitre box behind the box.
- Place the material to be cut on the board and hold it against the mitre box.
- Use a saw long enough to reach across the mitre box + work + cutting stroke.
How wide is a Mitre box?
There are two sizes available: a 150mm (6″) and a 230mm (9″) version. They are not suitable for cutting mitres on other types of workpiece. For skirting larger than 230mm (9″) or smaller than 150mm (6″) a different type of mitre box will be required such as a multipurpose mitre box.
How wide can a mitre saw cut?
Most 10” motorized miter saws can make crosscuts up to 5½” wide. In order to make wider cuts, add 2”x6” blocks of wood to the miter saw table. This raises the cutting surface up to a wider part of the blade, allowing for crosscuts about 1″ wider (6½” wide on most 10” miter saws). Watch this video to find out more.
What miter saw for skirting?
You can use both either a mitre block or mitre saw to do this. Simply work out which end needs cutting and mark where you need the cut to sit. If you’re using a mitre saw, simply set it to 45 degrees and make the cut.
How do I choose a miter box?
As a rule of thumb, if you are going to be using the mitre box for one project alone it would be advisable to choose a mitre box specifically designed for that project, e.g. if you are tiling a bathroom and need to cut metal tile edging, a tiler’s mitre box would be the preferred option.
Do miter boxes come in different sizes?
Powered compound miter saws are available in 8-1/2 inch, 10-inch and 12-inch models. For precise cuts, a 6-inch baseboard needs to be laid flat in an 8-1/2 inch saw to slice off a partial degree. The larger 10- and 12-inch models allow the 6-inch board to rest upright against the miter fence.
How thick can a 10 Mitre saw cut?
A saw with a 10-inch blade makes right-angle cuts across a board 5 1/2 inches wide, sufficient for two-by-six lumber. The same 10-inch saw will cut a two-by-four at a 45-degree angle. Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights.
Can you cut a 2×6 with a miter saw?
The bigger the blade, the deeper and wider its maximum cut. Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees; a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees.
Can you cut skirting with a mitre saw?
Top Tip: When cutting a long length of skirting, support the board at the end you’re not cutting, to ensure it is level with the base of the mitre box as you cut. Using the saw, cut the board at the required angle. Repeat the steps above for the second skirting board length to complete the corner.
What angle do you mitre skirting boards?
45-degree angle
First, you’ll need to cut a 45-degree angle in your board. Do this using a mitre saw or mitre box, angling your cut into the corner.
What is the best mitre block?
The Best Miter Box Sets for DIYers
- Best Value. GreatNeck Miter Box Set.
- Best Overall. Excel Blades Miter Box Set.
- Also Consider. Olson Miter Box Set.
- Best Mini Miter Box. Zona Mini Miter Box Set.
- Best Value. GreatNeck Miter Box Set.
- Best Overall. Excel Blades Miter Box Set.
- Also Consider. Olson Miter Box Set.
- Best Mini Miter Box.