How do you scale a drawing to 1 200 in AutoCAD?
If you say “Custom” in the scale, then set 1 & mm below that, then 200 below that at “Units”, that would be exactly the same as plotting 1:200 for a specified scale.
How do you scale a 1/100 schedule in AutoCAD?
Example: To plot in 1:100 scale when the drawing is in centimeters, enter 10 in the top box (10 mm = 1 cm) and 100 in the bottom one (100 units = 100 cm = 1 m). Click OK….Set the other plot options as needed.
- Page size.
- Drawing orientation.
- Plot style table.
- Plot offset.
- Other plot options.
How do you make a scale 1 500 in AutoCAD?
How to scale down in AutoCAD – Window select the object(s) in AutoCAD, type SCALE, and then specify a number between 0 and 1. Hit Enter. The size of the object(s) will SCALE DOWN by that factor. How to scale up in AutoCAD – Window select the object(s), type SCALE, and then specify a number larger than 1.
How do you use a 1 200 scale?
A drawing of 1:200 is representing 200 units for every one unit – and therefore is showing the elements smaller than the 1:50 drawing. It is worth noting that scale drawings represent the same units. So, if a drawing is at 1:50 in cm, 1cm in the drawing will be equal to 50cm in real life.
What does 1/200 mean on a plan?
So on a 1:200 scale plan, if you measured a wall length as 1 centimetre the actual length of the wall would be 2 metres. Mechanical drawings at times are drawn to actual size (1 to 1) or even enlarged (2 to 1).
What does the scale 1 2000 mean?
The measurement of 10 mm on the plan represents an actual size of 20000 mm or 20 m (2000 x 10 mm). An actual size of 48 m or 48000 mm is shown on the plan as 48000 ÷ 2000 = 24 mm.
How do you read a 1 200 scale?
What does the scale 1/100 convert to?
A scale of 1 to 100 is indicated on a drawing using the code 1:100. This can be interpreted as follows: 1 centimetre (0.01 metre) measured with a ruler on the plan would need to be multiplied by 100 to give the actual size of 1 metre.
What does 1 2000 mean on a map?
The measurement of 10 mm on the plan represents an actual size of 20000 mm or 20 m (2000 x 10 mm).