How do you manually release the parking brake on an Audi?
To release the parking brake manually, press the brake or accelerator pedal with the ignition switched on and simultaneously press the button .
Where is the parking brake switch located?
If you have a foot style parking brake, the switch is under the dash mounted to or behind the lever. If you have a hand style parking brake, the switch is mounted under the center console assembly on or below the lever.
How do you manually release an electronic parking brake?
With the AUTO switch OFF, the EPB can be applied by pushing and holding the parking brake switch. This will work with the ignition switch ON or OFF and with the vehicle moving or stationary. To release the brake, pull and hold the manual switch while at the same time pressing the brake pedal.
How do you release the electronic parking brake on an Audi with a dead battery?
If the battery dies, the parking brake system won’t operate. To release the parking brakes manually, a special tool is included along with the jack tools. Install the correct bit on the tool, remove the plug from the spare tire well, insert the tool and turn counterclockwise to release.
What do you do when your parking brake is stuck?
To release a stuck brake, you can do several things. If it is safe to do so, you can try rocking the vehicle back and forth or manually getting under the vehicle to pull the cables. You can also try setting and releasing the brake multiple times in the hopes of knocking the brakes free.
Why is my emergency brake beeping?
If you are driving your vehicle and the Brake Warning light is accompanied by a beeping sound, it means that the parking brake is engaged. When the parking brake is disengaged, the light and beeping should stop.
How do I reset my Discovery 4 handbrake?
With the Engine running, press the brake pedal fully on and off 3 times. On the third press, hold the brake pedal down. With the brake pedal still in the down position, pull the EPB switch upwards 4 times and then downwards 3 times. This must be completed within 10 seconds.