What size belt goes on a John Deere LT155?
John Deere LT155 (Deck 38″) Riding Lawn Mower Replacement Belt
| Original Equipment Manufacturer | John Deere | |
|---|---|---|
| VBG Replacement Id | APPL673589 | |
| Technical Specifications: | (Inches) | (mm) |
| Outside Circumference | 114.00 | 2895.60 |
| Top Width | 0.50 | 12.70 |
How do you change a transmission belt on a John Deere LT155?
- Step 1: It Isn’t As Bad As It Looks.
- Step 2: Remove the Tension Spring.
- Step 3: Disconnect the Tie Rods and Remove the Belt From the Motor.
- Step 4: Remove the Idler.
- Step 5: Remove the Belt From the Tensioner Assembly.
- Step 6: Put the New Belt on the Same Way the Old One Came Off.
How long is the drive belt on a John Deere LT155?
Length: 86-3/8″
What transmission is in a John Deere LT155?
John Deere LT155 Transmission
| Transmission | |
|---|---|
| Transmission | Tuff-Torq K51 |
| Gears | infinite forward and reverse |
| Oil change | sealed unit, owner service is not recommended |
| Hydrostatic transmission with two right-side foot pedals and right-side brake. Free-wheeling lever at rear of tractor. |
What year was the John Deere LT155 made?
John Deere LT155
| Production | |
|---|---|
| Manufacturer | John Deere |
| Built in Horicon, Wisconsin, USA | |
| Original price | $2,499 (1997 38 ) |
| $2,699 (1997 42 ) |
How long is a M128733 belt?
98.465 IN
John Deere Drive Belt
| Specification | |
|---|---|
| Belt Section | HA |
| Effective Length | 98.465 IN |
| Width | 0.559 IN |
| Thickness | 0.449 IN |
What year is John Deere LT155?
What motor is in John Deere LT155?
Kohler CV15S
John Deere LT155 Engine
| Engine Detail | |
|---|---|
| Kohler CV15S | |
| air-cooled vertical-shaft | |
| Displacement | 426 cc 26 ci |
| Bore/Stroke | 3.55×2.64 inches 90 x 67 mm |
How much does a John Deere LT155 weigh?
John Deere LT155 Dimensions
| John Deere LT155 Weight | |
|---|---|
| 470 lbs (with 38″ deck) 213 kg | |
| 475 lbs (with 42″ deck) 215 kg | |
| Shipping | 388 lbs 175 kg |
How long is the drive belt on a John Deere LT160?
8TEN Deck Drive Belt for John Deere LT160 M128733 42 inch 810-CBL2396T.
What size is the deck belt for a John Deere LT160?
38″ 42″ DECK BELT for JOHN DEERE LT133 LT150 LT155 LT160 LT180 42C M126536
| Part Number: | 265-638 |
|---|---|
| Pack Size: | 1 |
| Replaces (OEM): | JOHN DEERE M126536 |
| Fits Models: | JOHN DEERE LT133, LT150, LT155, LT160, LT166 and LT180 with 38 and 42C decks |
| Specs: | Application:Deck Length:114 1/4″ Type:Covered Width:1/2″ |
What size belt does a John Deere?
John Deere Commercial Mower Belts
| Model | OEM Part | Application – Dimensions |
|---|---|---|
| 32″ | PT8669 | Blade to blade(1/2″x43″) |
| 32″ | PT8675 | Wheel Drive Belt (Flat deck mo(5/8″x44″) |
| 36″ | PT8675 | Wheel Drive Belt (Flat deck mo(5/8″x44″) |
| 36″ | PT8676 | Blade to blade(1/2″x50″) |