What viscosity is dexron VI?
Property
| Property | |
|---|---|
| Brookfield Viscosity @ -40 C, mPa.s, ASTM D2983 | 11500 |
| Color, Visual | Red |
| Flash Point, Cleveland Open Cup, °C, ASTM D92 | 220 (428) |
| Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 | 5.83 |
What is special about dexron VI?
It has improved thermal stability for longer fluid life, better viscosity stability for consistent transmission operation, and specific frictional enhancements for smooth gear engagements. The way an automatic transmission shifts and adapts to ever-changing traffic and driving presents its own set of challenges.
Is GM dexron VI synthetic?
DESCRIPTION: ACDelco DEXRON-VI ATF is a high performance, synthetic blend formulation that meets or exceeds the stringent requirements of GM’s DEXRON-VI specification and provides warranty protection for current GM vehicles. It also provides improved performance in older GM vehicles, wherever DEXRON is specified.
What is the viscosity of ATF?
ATF III – Mineral automatic transmission fluid
| Temp. [°C] | Dyn. Viscosity [mPa.s] | Kin. Viscosity [mm²/s] |
|---|---|---|
| 0 | 217.29 | 247.39 |
| 10 | 118.06 | 135.42 |
| 20 | 70.04 | 80.93 |
| 30 | 44.70 | 52.04 |
Is Dex Merc the same as dexron VI?
Dex/Merc would be fine. Dexron VI is listed by GM as backward compatible, but is thinner than original Dexron III. I’d use the Dex/Merc myself.
When did GM switch to dexron VI?
2006
A: GM introduced DEXRON-VI in April 2005 as the next generation factory fill transmission fluid for 2006 model-year trucks and cars equipped with Hydra-Matic transmissions.
Is dexron VI silicone based?
Manual Transmission Fluid: The best choice would be those that do not contain silicone (DEXRON VI). If you are looking for the cheapest manual transmission fluid, choose those containing the best friction modifiers (like molybdenum or graphite).
Is Dexron VI low viscosity?
This product is a low viscosity, full synthetic ATF built for the following core performance specifications: GM DEXRON VI.
What is the ISO of transmission fluid?
ISO Grade 46, Mineral oil.
What year did GM start using DEXRON 6?
2005 – DEXRON-VI(J) The design of these transmissions required a new fluid.
Can you put Dex Merc instead of dexron VI?
Is dexron VI backwards compatible?
This fluid technology is designed to replace and supersede previous generation specifications from GM and Ford such as DEXRON III and MERCON/ MERCON V. General Motors officially states that DEXRON®-VI approved fluids are backwards compatible with and should replace all previous generation DEXRON fluids in service.
What viscosity is ATF?
What viscosity is ATF fluid?
Automatic Transmission Transmission Fluid is essentially thin hydraulic oil. In order to effectively lubricate the delicate parts of the system, the viscosity of the oil is kept low – generally around 0W/5 or 5W/10.
What is the viscosity of automatic transmission fluid?
5.5 cs
It is concluded that the current used-fluid Dexron viscosity limit of 5.5 cs minimum at 210 F provides a good safety factor for preventing excessive internal leakage at high temperatures.
What viscosity grade is ATF?
When did GM start using Dexron VI transmission fluid?
A: GM introduced DEXRON-VI in April 2005 as the next generation factory fill transmission fluid for 2006 model-year trucks and cars equipped with Hydra-Matic transmissions.
Can I use Dexron-VI fluid on any vehicle type?
Yes, DEXRON-VI fluid can be used on any vehicle type that calls for DEXRON transmission fluid. Does my transmission fluid need to be changed as regularly as my oil? No, transmission fluid is designed to last much longer than most engine oils.
Is the GMW16444 recommended for use with Dexron III(H)?
Recommended for all 2006 and newer vehicles GM requiring the GMW16444 specification and is fully backwards serviceable to Dexron® III(H), III(G), and II(E) applications and where Ford Mercon® LV is required. FEATURES/ BENEFITS transmission applications calling for use of a low
Is the performance of supersyn Dexron VI suitable for my application?
(SuperSyn Dexron VI has displayed suitable performance in the following applications. Dexron VI is a low viscosity specification, as a result this product may not meet all viscometric parameters of the below specifications.) High Viscosity Specifications