What is rig matting used for?
Rig mats are portable platforms. They are used to support equipment that is used during construction or oil drilling. These activities might include camps, drilling rigs, helipads, and tanks. Drilling Rig Mats can also be used as a structural roadway.
What are oil rig mats?
A rig mat is a portable structural support or platform used for oil rigs and other large-scale equipment, such as construction equipment. It typically consists of wood, steel or rubber and is used both to protect the Earth and to allow workers to perform in a variety of conditions.
What is matting in oil and gas?
Mats are interlocking boards laid over sensitive areas to build temporary roads and well sites. Matting provides a safe, strong and stable working platform over virtually any type of terrain. And matting is temporary.
How much weight can a rig mat support?
Q: What are the strength comparison between three beam and four beam mats?
| Mat Size | Beam Style | Load Capacity |
|---|---|---|
| 8′ X 20′ | 3 beam Rig Mat | approx. 36000 lbs/sqft |
| 8′ X 20′ | 4 beam Rig Mat | approx. 46000 lbs/sqft |
| 8′ X 40′ | 3 beam Rig Mat | approx. 36000 lbs/sqft |
| 8′ X 40′ | 4 beam Rig Mat | approx. 46000 lbs/sqft |
How big is a rig mat?
Advantages
| Rig Mat Type | Size | Weight |
|---|---|---|
| SteelLock | 8′ x 15 | 2,760 lbs |
| SteelLock LT | 8′ x 20′ | 2,070 lbs |
| Worksafe | 8′ x 20′ & 8′ x 40′ | 3,500 lbs & 7,000 lbs |
| Worksafe LT | 8′ x 20′ & 8′ x 40′ | 5,060 lbs |
What is construction mat?
Hardwood construction mats are hardwood planks laid side by side to allow easier transport and stable foundations. Hardwood mats are cheaper than their composite counterparts, but are prone to rot and damage, giving them a short lifespan. Composite mats fulfill the same functions as timber mats.
What are rig mats made of?
Constructed with a rigid combination of steel and wood, rig mats are designed to endure the heaviest loads.
What size are rig mats?
How much do swamp mats weigh?
Weight: 1700 lbs.
What are swamp mats?
Swamp mats – also known as access mats – serve multiple functions. First, they stabilize the ground so you can safely move crews and machinery where it needs to be, providing a solid, level surface not affected by surface water and precipitation.
How deep is a mat foundation?
Depending on the total load applied to the mat and underlying foundation system, the thickness of mat foundations can vary from 1 ft (0.3 m) to more than 20 ft (7 m). The reinforcing system in the mat can be quite substantial, with heavy reinforcing bar mats in the bottom, top, or both locations within the mat depth.
How much do timber mats cost?
Used Inventory
| Location | Size | Price |
| Houston, Tx | 8×14/8×16 Laminated Mat | $25.00 |
| Houston, Tx | 18’x4’x12″ Crane Mat | $75.00 |
| Houston, Tx | 16’x4’x12″ Crane Mat | $200.00 |
| Houston, Tx | 8’x4’x12″ Crane Mat | $125.00 |
How thick is a mat slab?
What is matting in construction?
Construction Matting means timber or composite matting free of soil, seeds, and vegetative material.
What is the advantage of mat foundation?
Mat foundation can be provided where the shallow foundation is necessary but soil condition is poor. It resists differential settlement. Mat foundation requires less earth excavation. Mat foundation itself can be considered as a floor slab.
How do you build a mat foundation?
Remove dirt and excavate soil to a uniform and flat level. The foundation bed is then compacted by ramming. Then, a waterproof plastic sheet is laid over the earth. After that, pour around 7cm layer of plain cement concrete to create a perfectly flat and level base for the foundation.
How much do timber mats weigh?
6″ APPROXIMATELY 27 LBS PER SQ FT. 8″ APPROXIMATELY 36 LBS PER SQ FT. 12″ APPROXIMATELY 54 LBS PER SQ FT. BASED ON 4.5/MBF.
How much does a 20 crane mat weigh?
When you look at crane mats that are normally 12″ thick the weight per foot goes up to around 240 lbs per foot. So a 20′ mat would weigh 4,800 lbs and a 30′ mat would weigh 7,200 lbs.
Do you manufacture drilling rig matting boards?
We manufacture drilling rig matting boards for oilfield clients. The following is an inquiry from clients for rig matting boards: Please provide your best prices, availability, delivery period & payment terms for the Following items. 8 ft width x 20 ft length by approximately 6 inch height. Wood matting with welded metal frame, 3 runner design.
What is a rig mat?
Crafted with quality in mind, our durable rig mats and oilfield rig mats are a state-of-the-art solution for professionals in the construction industry. Tested in the most rugged terrains, our rig mats are a top-of-the-line industry solution for safety and stability at your project sites.
What are the matting boards made of?
The matting boards at AIPU Solids are made of high quality carbon steel beam and the larch wood or the conifer wood. And for almost of wood, there is anti-corrosion process. Or we process it before inserting into steel frame or after.