What does F09 mean on Hotpoint washing machine?
Hotpoint F/09 – Overflow Condition The manufacturer has assigned this error or fault code to indicate that the machine is overfilling with water. This washer is equipped with a water level pressure switch.
What does E1 F9 mean on Hotpoint washing machine?
Washer Repair. A Whirlpool washer E1 or F9 error code (FP with some models) means that the washer is taking too long to drain (typically, over 8 minutes).
How do you fix E1 F9 error on a washing machine?
If F9 E1 (drain pump system problem – long drain) appears in display, the washer is taking too long to drain water. The drain may extend more than 4.5″ (114 mm) into standpipe. Check plumbing for correct drain hose installation. Use drain hose form and attach securely to drainpipe or tub.
What does E01 and F09 mean?
LONG DRAIN TIME
Accepted Answer. Whirlpool Duet Washer Error Code E01 F09 means LONG DRAIN TIME. When your Whirlpool washer goes into drain mode and the drain time is past 8 minutes and not reaching the reset level in the pressure sensor then the valves in the drain are turned off and the drain pump will cease to pump out the water.
How do I fix the error code E01 F09 on my Whirlpool Duet washer?
1 – You may have a drain hose that is bent and not letting the water drain out – Check the back of the washer. 2 – Be certain the drain hose height does not exceed 96″ or the washer cannot drain properly. 3 – Clean the drain pump filter on the bottom front of the washer of any particles or objects.
What does E01 and F09 mean on a washing machine?
How do I fix E01 error on washing machine?
This error code usually relates to problems with the door lock….How to Diagnose and Fix Fault Code E01
- Switch off and unplug your machine.
- Check the door lock itself. (Sometimes the plug on the lock can melt.)
- Check the wiring to the door lock.
- Check the wiring to the control board from the door look.
What does E09 mean on washing machine?
E09. If you see this error displayed it means there is a fault with the motor triac on the circuit board of your washing machine. The motor triac controls the speed of the machine’s motor.
How do you fix an E09 error on a Hoover washing machine?
Clean the filter Should E7 or E9 appear in your display, switch the machine off and remove the filter found in the door as shown, and clean away any fluff or debris caught in the filter. Switch the machine back on and try again, should the fault persist please contact us for further advice.
What does F09 mean on Indesit washing machine?
Software fault Issue
F09 — Software fault. Issue: Washing Machines isn’t operating multiple flashing lights and/or display. Unable to select a programme. Advice: We recommend you call our customer service centre to book an engineer on: 0344 822 4224.
What does E01 mean on a Hoover washing machine?
the door lock
If you see either E01 displayed or an LED light repeatedly flashes once between pauses, your machine has identified the problem: error code E01. This error code usually relates to problems with the door lock. (In some models error code E07 can also indicate a door lock issue.)
What is E09 on Hoover washing machine?
E09. This is indicative of a short circuit in the motor triac (which controls the spin speed) on the electronic module in your Hoover washer. It will no doubt require replacement.